A Mercer company - serving Dallas, TX

CertainTeed Roof Installation Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

CertainTeed Roof Installation in Dallas: What to Know First

CertainTeed roof installation in Dallas typically runs $9,800 to $18,400 for a full tear-off and replacement on a 2,000-square-foot home, depending on which CertainTeed shingle line you choose and the condition of your decking underneath. Most jobs take two to four days from tear-off to final cleanup. As an independent CertainTeed service provider, we give you a written line-item price before a single nail gets driven, and we never start work without it.

Call (432) 302-5605

If you own a CertainTeed roof that’s nearing the end of its life, or you’re comparing CertainTeed against other brands for a new installation, this page tells you what actually happens on a CertainTeed job in Dallas, what things cost, and where roofs in this market tend to fail first. Call (432) 302-5605 with any questions, or to schedule a free estimate.

How CertainTeed Products Fail – and How We Fix Them

  • Landmark and Landmark Pro granule loss (the telltale “balding” shingle). Dallas summers push roof surface temps past 150°F, and after about 12 to 15 years, the ceramic granules on CertainTeed’s standard architectural lines start shedding into gutters. You’ll see dark patches on the shingle face and a buildup of granules at downspouts. The fix isn’t re-granulating, which no reputable roofer does; it’s a localized replacement if the damage is isolated, or a full reroof if granule loss is widespread. We’ll tell you which one honestly, because a 14-year-old Landmark roof with 40% granule loss isn’t worth patching.
  • Presidential Shake and XT 30 curling from attic heat. CertainTeed’s premium laminated lines are thicker and more rigid than standard architectural shingles. In Dallas’s 100°F-plus summers, if attic ventilation wasn’t installed correctly at the time of the original roof, those thick shingles curl at the edges and crack along the nail line. We check venting before we quote the job. A roof replacement on a house with one puny ridge vent and no soffit intake will fail the same way in five years, regardless of what shingle you put on.
  • Integrity and CT 20 flashing failures at transitions. Most CertainTeed roof leaks we see in older Plano and Richardson homes aren’t shingle failures at all. They’re flashing failures where the roof meets a chimney, a wall, or a valley. The original installer used thin, low-grade step flashing or skipped the kickout flashing entirely. On our CertainTeed installations, we use 24-gauge galvanized flashing, and we replace every piece of flashing on a teardown rather than trying to reuse it.
  • WinterGuard and DiamondDeck underlayment breakdown at eaves and low slopes. CertainTeed makes excellent synthetic underlayments, but in Dallas, the problem is installer error: we regularly see roofers skimp on underlayment at the eaves, on dormers, and on low-pitch sections. Those are exactly the spots where ice damming and wind-driven rain hit first. Our standard is two courses of underlayment at the eave line and ice-and-water membrane on any pitch lower than 3:12, regardless of what the building code minimum says.
  • Starter strip and ridge cap neglect (the leak you don’t see until it’s too late). CertainTeed warranties require their starter shingles and ridge caps to be installed with the field shingles. If a contractor skips the starter strip at the eave, or uses generic caps instead of the matching CertainTeed product, the manufacturer can deny a warranty claim later. We inspect every roof for starter and cap issues before quoting, and we use CertainTeed-branded accessories on every CertainTeed job.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our CertainTeed Roof Installation Process

Here’s what a full CertainTeed roof installation with us looks like, from first call to final sweep.

  1. 1
    Call and schedule the free estimate. A live person answers, not a voicemail, and we’ll set up a time that works for you. Before our tech arrives, we’ll send you their name and photo so you know who to expect at the door.
  2. 2
    The inspection. Grant Whitlock or one of us walks the roof and the attic, takes photos, and checks decking, flashing, ventilation, and the current shingle condition. We look for the specific CertainTeed failure modes we described above, and we show you what we find.
  3. 3
    The written quote. You get a line-item price in writing. No change orders, no “we’ll see what we find” pricing. The number we give you is the number you pay, unless we both agree to something different in writing before the work changes.
  4. 4
    Tear-off and prep. We strip the old roof to the decking, inspect for rot and soft spots, replace any bad decking, and install new underlayment, drip edge, and starter shingles per CertainTeed’s published installation requirements.
  5. 5
    Installation and cleanup. We install the field shingles, ridge caps, and all flashing in line with the manufacturer’s specs and Dallas code. We run a magnet sweep for nails daily and do a final pass before we leave.
  6. 6
    Written guarantee and the 365-Day Done Right Promise. You get the warranty in writing before we leave. If anything isn’t right within a year, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What CertainTeed Roof Installation Costs in Dallas

Here are real numbers from our Dallas jobs, based on a straightforward tear-off and replacement with no structural surprises.

Scope Typical Range
Full CertainTeed Landmark installation, 1,800 – 2,200 sq. ft. $8,800 – $12,900
Full CertainTeed Landmark Pro installation, same size $10,200 – $14,600
CertainTeed Presidential Shake or XT 30, same size $14,500 – $19,800
Decking replacement (per 4×8 sheet, if needed) $70 – $110 per sheet
Upgraded underlayment (DiamondDeck or WinterGuard at eaves) $0.35 – $0.80 per sq. ft. added

What moves the price: roof pitch (steep roofs cost more), access (tight Dallas lots with fences and landscaping), decking condition, and whether you need any structural work once we strip to the deck. That’s why we quote after inspection, not before. Call (432) 302-5605 for a free estimate with a written, line-item price.

Why Dallas Homeowners Call Mercer Roofing Co Dallas for CertainTeed Work

A roof shouldn’t be something you worry about. Let’s make sure yours isn’t.

Here’s the thing most roofing companies in Dallas won’t say out loud: the shingle matters less than the people installing it. A CertainTeed roof installed wrong will fail years before a cheap roof installed right. That’s why we put our process in front of you, not just our brand pitch.

Every tech we send to your door is background-checked, identity-verified, and in a clean, marked uniform with a photo ID badge. You get their name and photo before they arrive, and they present that badge at the door. That’s the Threshold Verified standard, and we’ve been part of the Threshold Group family since 2000.

We install CertainTeed because it’s a good product, but we also work with GAF and Owens Corning for homeowners who need other options, and we’re honest about which one actually suits your roof. Every job gets the 365-Day Done Right Promise and a written guarantee on every repair. If a repair fails, we come back for a free second visit.

FAQs

Need Roofing help in Dallas? Licensed & insured · Free on-site estimates response · free estimates
Call (432) 302-5605
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Mercer Roofing Co Dallas responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and agree to be contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch