A Mercer company - serving Dallas, TX

Owens Corning Roof Repair Nationwide

Owens CorningOwens Corning
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Roof Repair in Dallas: What to Know First

Owens Corning roof repair in Dallas typically costs between $275 and $650 for most shingle and flashing repairs, with most jobs completed the same week we schedule them. We are an independent Owens Corning service provider in Dallas, not a manufacturer-authorized shop, which means we make repair decisions based on what’s actually best for your roof, not what a corporate program dictates. Every repair comes with a written price before we start and a 365-day written guarantee.

Call (432) 302-5605

This page is for Dallas homeowners with Owens Corning shingles who’ve spotted a leak, lost shingles to wind, or found granules in their gutters and want to know what’s wrong, what it costs, and who to trust. Call (432) 302-5605 and a live person answers, day or night.

How Owens Corning Products Fail – and How We Fix Them

  • Duration Series granule loss and shingle cracking: We see Duration shingles on Dallas homes from roughly 2008-2016 showing premature granule loss along the nail line and the leading edge. The Texas sun bakes the asphalt layer, and once granules go, the shingle’s UV protection is gone. We replace individual damaged shingles and check the surrounding field for early signs, because when one goes, the neighbors aren’t far behind.
  • Oakridge series wind-lift at the seal strip: Oakridge shingles from the mid-2000s had a narrower thermal seal than later models. After enough Dallas windstorms, the seal releases and shingles lift but stay attached. We can re-seal lifted shingles with proper adhesive where the seal strip is still intact, or replace the lifted shingle entirely if the mat is delaminating.
  • Vent boot failures on Owens Corning roofs of every age: This is less about the shingle and more about what Dallas roofers installed around it. Cracked rubber vent boots let water run straight down the pipe and onto the Owens Corning underlayment. We replace boots with a better-quality neoprene collar and re-flash the base with the shingle course, not just caulk over a crack.
  • Chalk line ghosting from original installation: A detail you’d never get from the Owens Corning website: we regularly find chalk-line marks printed into the shingle surface on Dallas roofs where installers snapped lines on a hot deck and didn’t wipe them off. Once the granules heat up, the chalk bakes in. It looks like staining but it’s purely cosmetic. If the shingle is otherwise intact, we tell you to leave it alone. If it’s on a heavily sun-hit slope and the granules are already thinning, replacement may be warranted.
  • Flashing junction failures around chimneys and valleys on Owens Corning Oakridge and Duration roofs: Dallas’s freeze-thaw cycles and hail hammer the thin aluminum step flashing original to many builds. Water gets under the shingle course at the corner, runs along the decking, and shows up far from the source. We re-flash the junction with proper overlap and replace the affected decking, which is the part nobody sees but matters most.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Owens Corning Roof Repair Process

  1. 1
    You call, a person answers: No phone tree. We hear what’s happening, ask a few questions, and schedule a time. Before the technician arrives, you get their name and photo sent to you.
  2. 2
    We show up and badge in: The technician arrives in a marked truck, uniformed, photo ID in hand. They’ll verify who they are at the door before stepping foot on the property.
  3. 3
    We diagnose on the roof, not from the ground: Every Owens Corning repair starts with a roof-level inspection. We check the shingles, flashing, boots, and valley condition. If the decking looks suspect, we say so before we pull anything apart.
  4. 4
    You get a written price before work starts: No verbal estimates, no “we’ll see when we get in there.” You get a line-item price on paper. If we find hidden damage behind a wall of shingles, we stop, take photos, and come back with a revised written price.
  5. 5
    We repair with manufacturer-matched or better parts: Where Owens Corning has a compatible OEM component, we use it. Where a quality aftermarket part outperforms the original at a lower cost, we tell you and use that instead. You approve the parts call.
  6. 6
    We test, clean up, and hand you a written guarantee: We water-test every leak repair, sweep the driveway with magnets for stray nails, and walk you through what we did on the roof. Every repair carries a written 365-day guarantee. If it fails within the year, we return and make it right at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Owens Corning Roof Repair Costs in Dallas

Repair Type Typical Cost in Dallas
Single shingle replacement (Duration or Oakridge match) $275 – $400
Vent boot replacement and re-flashing $225 – $375
Flashing repair at chimney or wall junction $400 – $650
Valley repair on Owens Corning shingle roof $350 – $700
Flat roof patch (modified bitumen over Owens Corning underlayment) $450 – $850

What moves the price: roof pitch and height, accessibility, how much decking needs replacement, and whether we can reuse existing shingles or have to fully match a discontinued color lot. We carry common Owens Corning colors in our Dallas inventory, but some older Oakridge colors have been out of production for years and require close-match blending. Call (432) 302-5605 for an exact written quote. Estimates are free, and the price we give is the price you pay.

Why Dallas Homeowners Call Mercer Roofing Co Dallas for Owens Corning Work

Most homeowners never see the person who’s going to be on their roof until they’re already there. We do things differently. Before any Mercer Roofing Co Dallas technician steps onto your Owens Corning roof, you get their name and photo. When they arrive, they badge in with a photo ID. That’s the Threshold Standard, and every one of our techs is background-checked, identity-verified, and uniformed.

We know Owens Corning products, but we also service GAF, CertainTeed, IKO, Atlas, Tamko, and Boral, so when a Dallas roof has been patched with mixed shingles over the years, we can sort out what’s what. We’re part of the Threshold Group family, founded in 2000, and every location is independently owned and held to the same standard. Grant Whitlock runs our Dallas operation and has put on hundreds of roofs from Oak Cliff to Far North Dallas. As he says, “A roof shouldn’t be something you worry about. Let’s make sure yours isn’t.”

FAQs

Need Roofing help in Dallas? Licensed & insured · Free on-site estimates response · free estimates
Call (432) 302-5605
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Mercer Roofing Co Dallas responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and agree to be contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch