Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Murphy
Roof repair in Murphy runs $275 – $1,450 for most jobs, with shingle replacement typically landing between $325 and $650 for a standard patch. Storm damage repairs after hail or high wind usually fall in the $900 – $2,800 range depending on slope count and decking condition. We know Murphy’s rooflines because we’ve worked them through every storm season since the big one. If water is getting in or shingles are lifting, call (432) 302-5605 for a written estimate before any work starts. A live person answers, day or night.
Why Mercer Roofing Co Dallas Is Murphy’s Preferred Roof Repair Company
Murphy homeowners have a specific worry when they call a roofer: who, exactly, is coming to the door. We solve that before the truck rolls. Every Mercer technician’s name and photo is sent to you ahead of the visit. They arrive in a clean, marked uniform and badge in with a photo ID at your door. That’s the Threshold Verified standard, and every independently owned Mercer location is contractually held to it.
Our Roof Repair team has handled hundreds of Murphy homes, from the original 1990s builds off Murphy Road to the newer subdivisions east of McCreary. We know which slopes catch the March wind and which valleys hold hail longer than they should. The 365-Day Done Right Promise covers every repair: if it’s not right within one year, we make it right. Written guarantee included with every job, and a free second visit if a repair fails.
Styles & brands we work with
Shingle Roof Repair in Murphy
Shingle Roof Repair in Murphy usually means matching architectural shingles on homes built during the 1990s – 2000s expansion, many of which have steep pitches with multiple hips, valleys, and gables. A single missing tab on a southern exposure can turn into decking rot within one storm season. We replace damaged shingles with manufacturer-recognized brands including GAF, CertainTeed, and Owens Corning, installed to the nailing pattern Murphy’s wind code demands.
Matched Architectural Shingles
Most Murphy homes were roofed with dimensional shingles, not three-tab. Matching color and profile matters, especially on front-facing slopes along Maxwell Creek and the neighborhoods off Betsy Lane. We carry local stock of common GAF Timberline and CertainTeed Landmark colors so a single-slope repair doesn’t leave an eyesore the HOA flags.
Fastener and Seal Verification
A repair isn’t done until every shingle around the patch area is checked for proper nailing. In Murphy, that means six nails per shingle on exposed slopes, not four. Hand-sealed tabs won’t pass the wind-load inspection, and we won’t install them. Every repair gets the same fastening standard as a full replacement.
Storm Damage Roof Repair in Murphy
Storm Damage Roof Repair in Murphy follows a pattern we know well: hail from March through June leaves bruise marks across hundreds of roofs in a single evening, and straight-line winds lift shingles along rakes and ridge lines. After severe weather, water entry often starts small, at a lifted starter strip or a cracked vent boot, before it reaches the ceiling. Repairs after a storm typically cost $900 – $2,800 in Murphy, depending on how many slopes are involved and whether decking needs replacement.
Hail Bruise Assessment
Hail doesn’t always knock shingles off. It leaves circular fractures in the mat that don’t show from the ground. We inspect each slope, not just the one facing the street. If we find the storm’s signature bruise pattern across multiple slopes, as we did on hundreds of Murphy homes after the May 2011 hailstorm, we document it for your insurance file with photos and measurements.
Wind-Lift Repair
After a March windstorm tore through Rolling Ridge, our crew found architectural shingles from a 2004 build lifted along the rake and missing starter strip tabs on three slopes. We stripped the damaged sections, replaced rotted decking, reinstalled ice and water shield at the eaves, and upgraded to CertainTeed Landmark shingles with the mandated six-nail pattern. The repair passed the city’s post-repair wind-load inspection, and the compliance certificate went to the homeowner for their records.
Trusted Brands We Service in Murphy
We install and repair GAF, CertainTeed, and Owens Corning shingles regularly across Murphy, and we keep common colors in local stock so a repair isn’t delayed waiting on a distributor. Tamko and Boral are available for homes with specialty profiles or color match needs from earlier builds. Fast turnaround matters here because a temporary tarp in a Murphy HOA community draws notice quickly. We match the existing roof as closely as the current product line allows, and we tell you the brand and color in the written estimate before any work starts.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Murphy Homes
– Lifted starter strips along rakes. High winds off the plains grab the first course of shingles and peel it back. Once the starter strip goes, every course above it becomes a sail in the next storm.
– Hail bruising on southern and western exposures. Murphy’s hailstorms drive ice at an angle, and the slopes facing the storm take concentrated impact. The damage looks like small dark circles or soft spots under the granule layer.
– Valley wear on steep rooflines. Many Murphy homes built after 2000 have complex rooflines with multiple valleys. Hail and debris collect there, and water runs fastest through the valley, wearing through granules years before the field shingles fail.
– Vent boot and flashing failures at pipe penetrations. Summer heat cycles crack the rubber boots around plumbing vents and the sealant around flashings. A cracked boot leaks slowly for months before it shows on the ceiling, and by then the decking is soft.
Pricing for Roof Repair in Murphy, TX
We Also Serve Cities Near Murphy
Our crews work throughout the northeast metro, including Murphy, Dallas, Plano, Grand Prairie, and Richardson. If you’re just outside Murphy limits, call anyway. We’ll tell you straight whether we cover your street and what the response time looks like from our Dallas-Fort Worth dispatch office.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Murphy
What wind rating does Murphy require for roof repair shingles, and how is it verified?
Murphy’s building code requires new or replaced roof coverings to meet ASTM D3161 Class F wind resistance (110 mph) or ASTM D7158 Class H (150 mph), depending on the roof’s exposure. Verification happens through the city’s post-repair wind-load inspection, which checks the nailing pattern and shingle rating against the permit documentation. Call (432) 302-5605 and we’ll pull the right spec for your street before quoting.
How does the May 2011 Murphy hailstorm still affect my roof repair today?
The May 2011 hailstorm left such a distinct bruise pattern on shingles across Murphy that local roofers and adjusters still use it as a reference point when assessing current hail damage. If your roof was repaired or replaced after 2011 with a lower wind rating, or if the repair never received a compliance certificate, a new hail claim can get denied. We check the existing shingle’s date code and wind rating during every inspection and document what we find.
Does Murphy require a permit for a partial shingle repair, and what does it include?
Yes, Murphy requires a re-roof permit for shingle replacement beyond a very small patch, and the permit includes a final wind-load inspection by the city. The inspector verifies the shingle’s wind rating, the nailing pattern, and the underlayment at the eaves. Repairs done without this permit are a red-tag risk, and the insurance carrier won’t have the compliance certificate they want on file. We pull the permit, schedule the inspection, and hand you the signed certificate when it passes. Call (432) 302-5605 for an exact quote, including the permit fee.
What is a Murphy-compliant repair quote supposed to include that a cheap quote leaves out?
A compliant quote in Murphy includes the specific shingle brand and wind rating, a six-nail fastening pattern on exposed slopes, ice and water shield at the eaves where the repair meets the roof edge, starter strip replacement if it’s compromised, the city permit fee, and the final wind-load inspection. A cheap quote skips the permit, uses hand-sealed tabs, and comes without a compliance certificate. When hail returns, the insurer asks for that certificate. If it isn’t there, the claim is denied. We put everything in writing before the first nail goes in.
Will the city inspection report help with a future insurance claim?
Yes. The city’s signed wind-load inspection report is the document your insurer looks for when a future hailstorm damages the same roof. It proves the repair met Murphy’s code at the time it was done, which keeps the claim moving instead of stalling on questions about whether the roof was ever properly repaired. We include the report with every permitted repair, and we recommend keeping it with your policy documents. For a free estimate that includes the permit and inspection, call (432) 302-5605.
Written by Grant Whitlock, Owner at Mercer Roofing Co Dallas, serving Murphy, TX.